Industrial Filtration Inc logo

Goyen CC150 Cartridge Cleaning Cone – 100-175 mm Filter ID

Product Type: Cartridge Cleaning Cone

Suitable Filter Internal Diameter: 100 – 175 mm (3.9 – 6.9")

Material: 30% glass filled PA-6 (cone and clip)

Temperature Range: -40°C to 80°C (-40°F to 176°F)

Unit Mass: 0.07 kg (0.154 lbs)

Dimension H: 77 mm (3.03")

Supplied As: Cone and clip

Fits: Any nozzle in the Goyen GOCO range

Minimum Filter ID: 60 mm (2.4")

SKU CC150 Category

Description

This replacement Goyen CC150 Cartridge Cleaning Cone was designed to the same specifications and is guaranteed to fit/perform as well as the OEM

*All filters and items marked replacement are not affiliated or associated with the original manufacture. Part numbers and names are used for cross reference only.

All valve and repair kits are backed by a 100% money back guarantee against defects in materials and workmanship. In the event of a product failure, we will replace the affected kit at no additional cost.

For Genuine Goyen Valves and Parts please call 562-436-4228 or email us at info@industrialfiltrationinc.com

Cartridge cleaning cone for filter elements with an internal diameter of 100 – 175 mm (3.9 – 6.9"). It clips onto the outlet of any Goyen GOCO nozzle and spreads the cleaning pulse evenly down the whole length of the element.

Why it matters on cartridges. Without a cone, the pulse never overcomes the normal filter differential near the top of the element, so the top blinds off while the bottom gets over-pressured. In Goyen’s test on a 240 mm ID cartridge, the cone held the developed pressure close to even along the element at about 4" Wg average, where the same system without one swung from negative at the top to roughly 15" Wg at the bottom. The result is lost filter area, a damaged membrane and shorter element life.

Fitting: snap the clip over the four legs of the cone, then snap the assembly over the nozzle outlet. When installed in the baghouse, the end of the cone should sit 30 to 80 mm (1.13" to 3.14") from the filter opening. To work out total assembly height, add H = 77 mm (3.03") to the nozzle length.

Not for gas turbine applications. Goyen specifically excludes the GOCO nozzle range from gas turbine service.

Other filter diameters:

Fits any GOCO nozzle – call 562-436-4228 if you want the nozzle and cone matched to your element.

Listed in the Goyen GOCO Blowtube Nozzles and Cartridge Cleaning Cones product leaflet.

Reviews

There are no reviews yet.

Be the first to review “Goyen CC150 Cartridge Cleaning Cone – 100-175 mm Filter ID”

contact us

Products

search

Industrial Filtration Inc logo

Request A Quote

To request a quote, enter the filter part #, along with a brief description of what you are looking for (optional), then hit 'Request quote'. Thank you for the opportunity to quote.

or try to find it on our website