Goyen K2535-2 Camlock Flange Adaptor – 25FS – 8″ Round Tank

Description

This replacement Goyen K2535-2 Camlock Flange Adaptor was designed to the same specifications and is guaranteed to fit/perform as well as the OEM

*All filters and items marked replacement are not affiliated or associated with the original manufacture. Part numbers and names are used for cross reference only.

All valve and repair kits are backed by a 100% money back guarantee against defects in materials and workmanship. In the event of a product failure, we will replace the affected kit at no additional cost.

For Genuine Goyen Valves and Parts please call 562-436-4228 or email us at info@industrialfiltrationinc.com

Camlock flange adaptor that mounts a Goyen 25FS flanged valve onto a Schedule 40 nominal 8" round tank without welding. The flange face is contoured to the tank radius, so it seats against the curve and still gives the valve a flat mating surface.

Fitting: cut a 51 +/- 1 mm (2.01 +/- 0.04") hole with a hole saw – Goyen specifically advises against gas cutting. Loosely assemble each cam, centre the camlock over the hole with the o-ring in place and lubricated, rotate the cams to engage the tank hole edge until the alignment marks meet, then tighten to 8 Nm (6 ft-lbs). Tank wall must be between 4 mm and 8 mm thick.

Other tank sizes:

Welded alternative: Goyen G690349 Welded Stub Flange · Goyen G690166 Welded Flat Flange

Listed in the Goyen master catalogue, Technical Specification ‘FS’ Series Pulse Jet Valves.